Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science

EXPERIMENTAL STUDY OF THE SNOW REMOVAL PROCESS BY HELICAL BLADE OF THE MILLing FEEDER


DOI: 10.5937/jaes0-39760 
This is an open access article distributed under the CC BY 4.0
Creative Commons License

Volume 21 article 1060 pages: 157-166

Bekbolat Moldakhanov
D. Serikbayev East Kazakhstan Technical University, 69, Protozanova str., Ust-Kamenogorsk, Kazakhstan

Mikhail Doudkin
D. Serikbayev East Kazakhstan Technical University, 69, Protozanova str., Ust-Kamenogorsk, Kazakhstan

Alina Kim*
Miras University, 2, Sapak Datka, Shymkent, Kazakhstan

Valery Rogovsky
D. Serikbayev East Kazakhstan Technical University, 69, Protozanova str., Ust-Kamenogorsk, Kazakhstan

Nikita Andryukhov
Moscow Automobile and Road Construction State Technical University, 64, Leningradsky Ave., Moscow, Russia

The article presents the process effectiveness evaluation of the throwing snow mass from the face into the operating area of the snowplow rotor-thrower by a milling feeder, when using a paddle type intensifier. During the operation of the milling-rotor snowplow, an operational problem sometimes arises, arising from an incorrectly set slope (angle of elevation) of the helical line of the milling feeder, due to which snow is thrown forward by it along the snowplow, forming an additional amount of snow for processing, which increases the overall energy costs for the development of snow and the movement of the machine in the snow massif and at the same time reduces the performance of the snowplow [1, 2]. The area of rational values of the design and operating parameters of the milling feeder and the bladed intensifier of the snowplow has been calculated. The process of efficiency increase of the milling-rotary snowplow (MRS) and its performance by adjusting the helix angle α and installing a bladed intensifier reducing the power of the working process will make it possible to perform work on clearing snow and ice formations using reduced number of machines, furthermore in much less time. A more massive supply of snow mass to the blades of the rotor-thrower due to the use of an intensifier will lead to a decrease in the total energy costs for the snowplow working process. Therefore, by increase the working equipment efficiency of a MRS with the energy intensity decrease of snow development by selecting rational parameters for its design and workflow is the simplest and most effective way to rationally organize the workflow and improve machines of this type of snowplow.

View article

This research is funded by the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grant No. AP09260192 - Development of innovative milling-rotary snow-clearing working equipment with increased efficiency), and this is the result of the dissertation work of Bekbolat Moldakhanov.

1.      Doudkin, M., Kim, A., Moldakhanov, B., Kustarev, G., Andryukhov, N., Rogovsky, V., Doudkina, Y. (2021). Experimental Studies of the Physical Model of the Milling-Rotary Snow Cleaner. International Review of Mechanical Engineering (I.RE.M.E.), Vol. 15, N. 9, pp. 453-463. DOI: https://doi.org/10.15866/ireme.v15i9.20952

2.      Doudkin, M., Kim, A., Moldakhanov, B. (2021). Determination of Forces in the Working Unit of the Milling-Rotary Snow Cleaner. International Review of Mechanical Engineering, Vol. 15, N.2, 2021. 96-105. https://doi.org/10.15866/ireme.v15i2.20859  

3.      Kim, A., Doudkin, M., Guryanov, G., Mlynczak, M., Eleukenov, M., Bugaev, A., Rogovsky, V. (2019). Process modeling and experimental verification of the conditions of ice coverage destruction of automobile roads. Journal of Mechanical Engineering Research and Developments (JMERD), 42(4), pp. 01-08.   DOI: http://doi.org/10.26480/jmerd.04.2019. 01.08

4.      Aleshkov, D.S., Sukovin, M.V. (2018). The model of the formation of snow piles at work milling and rotary snowblower. The Eurasian Scientific Journal, 6(10), 12 р. https://esj.today/PDF/13SAVN618.pdf.

5.      Gaume, J., Chambon, G., Reiweger, I., Herwijnen, A.V., Schweizer, J. (2014).  On the failure criterion of weak-snow layers using the discrete element method. Proceedings, International Snow Science Workshop, Banff, Canada, pp. 681- 688. 

6.      Saveliev, A., Zhileykin, M., Mikhailovskaya, V., Doudkin, M., Kim, A., Mlynczak, M., Kustarev, G., Grib, V. (2019). Icreasing the reliability of the autograder metal construction by modeling and re-assembling of the working equipment. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, Vol. 6, Issue 438, p. 276-286. https://doi.org/10.32014/2019.2518-170X.179

7.      Doudkin, M., Kim, A., Savelyev, A., Zhileikin, A., Gribb, V., Mikhailovskaya, V. (2020). Modernization of the Metal Structure of the Grader Working EquipmentInternational Review of Mechanical Engineering (I.RE.M.E.), Vol. 14, N. 1, 1-8 

8.      Kim, A., Doudkin, M., Ermilov, A., Kustarev, G., Sakimov, M., Mlynczak, M. (2020). Analysis of vibroexciters working process of the improved efficiency for ice breaking, construction and road machines. Journal of vibroengineering, vol. 22, issue 3, 465-485, https://doi.org/10.21595/jve.2020.20446

9.      Doudkin, M.V., Pichugin, S.Y.U., Fadeyev, S.N. (2013). The analysis of road machine working elements parameters. World Applied Sciences Journal, 23(2), pp. 151–158

10.   Sakimov, M.A., Ozhikenova, A.K., Abdeyev, B.M., Ozhiken, A.K., Azamatkyzy, S. (2018). Finding allowable deformation of the road roller shell with variable curvature. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 2018, 3(429), pp. 197–207

11.   Doudkin, M.V., Pichugin, S.Y.U., Fadeyev, S.N. (2013). The analysis of road machine working elements parameters. World Applied Sciences Journal, 23(2), pp. 151–158

12.   Doudkin, M., Apshikur, B., Kim, A., Ipalakov, T., Asangaliyev, E., Mlynczak, M., Tungushbayeva, Z. (2019). Development of mathematical models describing the processes occurring in the railway track construction as a whole, or in the work of its individual elements. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, vol. 5, issue 437, 6-15, https://doi.org/10.32014/2019.2518-170X.120

13.   Doudkin, M., Kim, A., Sakimov, M. (2020). Mathematical and experimental study of deformations of a steel roll of a road roller with a variable geometry of a contact surface. Production Engineering Archives, Vol. 25, p. 1-7. https://doi.org/10.30657/pea.2019.25.01

14.   Doudkin, M., Kim, A., Młyńczak, M., Kustarev, G., Kim, V. (2019). Development and parameter justification of vibroscreen feed elements. Mining Machines and Earth-Moving Equipment: Problems of Design, Research and Maintenance, pp. 203–226.