Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science

CORRELATION BETWEEN PERMEABILITY AND POROSITY WITH OTHER PROPERTIES OF CONCRETE


DOI: 10.5937/jaes0-27267 
This is an open access article distributed under the CC BY 4.0
Creative Commons License

Volume 19 article 824 pages: 542-550

Mohammed Salman Al-lami*
Al-Isra University, Department of Civil Engineering, Amman, Jordan

Most of concrete properties such as strength, permeability, density and absorption are significantly affected by the porosity of its internal microstructure. Many researchers studied the relationships between permeability, porosity and other properties of concrete, but in the author's opinion, the subject still needs more researching works. The purpose of this research is to investigate the possible correlations between concrete porosity and permeability with other properties such as compressive strength, absorption and density. Helium Gas Pores meter was used to measure porosity and Nitrogen Gas Permeate device was used to measure permeability. The investigated variables were the aggregate to cement ratio (A/C) and water to cement ratio (W/C). Based on regression analysis of test results, mathematical relationships between tested properties were suggested. The higher correlations were observed for mixes with constant water to cement ratio and variable aggregate to cement ratio.

View article

1. Neville, A.M., (1995). Properties of Concrete. Fourth edition, Longman Group Limited, Essex, England.

2. Bgel L, Zivica, V. (1997). Relationship between pore structure and permeability of hardened cement mortars: On the choice of effective pore structure parameter. Cement and Concrete Research, Volume 27, Issue, August, PP. 1225-1235. https://doi. org/10.1016/S0008-8846(97)00111-7.

3. Nyame, B.K., Illston, J.M. (1981). Relationship between Permeability and Pore Structure of Hardened Cement Paste. Magazine of Concrete Research, Vol.33, No. 116, PP. 139-146.

4. Watson, .A.J., Oyeka, C.C. (1981).Oil permeability of hardened Cement paste and concrete. Magazine of concrete research, Vol. 33, No 115, pp. 85-95.

5. Okpala, D.C. (1989). Crude Oil Permeability of hardened Cement Mortar. The Indian concrete journal, Vol. 63, No 6, pp. 295-300

6. Jaya, R. P, Abu Bakar, B. H., Johari, M. A. M., Ibrahim, M. H. W. (2011). Strength and permeability properties of concrete containing rice husk ash with different grinding time. Central European Journal of Engineering, Cent. Eur. J. Eng., 1(1), PP. 103-112, DOI: 10.2478/s13531-010-0003-4.

7. Lian, C., Zhuge, Y., Beecham, S. (2011). The relationship between porosity and strength for porous concrete. VoL. 25, Issue 11, November, PP. 4294- 4298.

8. Chen, X., Wu, S., Zhou,J. (2013). Influence of porosity on compressive and tensile strength of cement mortar. Vol.40, March, PP. 869-874.

9. Singh, A. P. (2013). Strength and Permeability Characteristics of Steel Fibre Reinforced Concrete. International Journal of Civil and Environmental Engineering Vol.7, No.10, PP. 733-738.

10. Elawady, E., El Hefnawy, A. A., Rania A. F. I. (2014). Comparative Study on Strength, Permeability and Sorptivity of Concrete and their relation with Concrete Durability. International Journal of Engineering and Innovative Technology (IJEIT) Vol. 4, Issue 4, October.

11. Zhao, H., Xiao, Q., Huang, D., Zhang, S. (2014). Influence of Pore Structure on Compressive Strength of Cement Mortar. The Scientific World Journal, Volume 2014, Article ID 247058, 12 pages. http://dx. doi.org/10.1155/2014/247058.

12. Kondraivendhan, B., Bhattacharjee, B. (2010). Effect of age and water-cement ratio on size and dispersion of pores in ordinary Portland cement paste,” ACI Materials Journal, vol. 107, no. 2, pp. 147–154.

13. Bu, J., Tian, Z. (2016). Relationship between pore structure and compressive strength of concrete: Experiments and statistical modeling. Sadhana Vol. 41, No. 3, March, PP. 337–344.

14. Pratap, K.V., Venkatesh, K., Enthiyaz, Sk., Sumi, M.., Ratnasiri, Y. (2018). Water Permeability, Porosity and Compressive Strength of High Performance Concrete. International Journal of Pure and Applied Mathematics, Vol. 120, No. 6, PP. 4193-4209.

15. Zhang, S. P., Zong, L., (2014). Evaluation of Relationship between Water Absorption and Durability of Concrete Materials. Hindawi Publishing Corporation, Advances in Materials Science and Engineering, Volume 2014, Article ID 650373, 8 pages, http://dx- .doi.org/10.1155/2014/650373

16. ASTM, “Specification for Portland cement,” ASTM C 150, ASTM, West Conshohocken, Pa, USA, 2007.

17. British Standards Institution, B.S. 882: 1992. Aggregate from natural sources for concrete, London

18. ASTM C 642, "Standard Test Method for Density, Absorption, and Voids in Hardened Concrete", Annual Book of ASTM, Standards, Vol. 04.02, 1997.

19. B.S.1881, Part 116, 1989, Method for Determination of Compressive Strength of Concrete Cubes, British Standard Institute London.

20. Wong, H. S., Buenfeld, N. R., (2009). Determining the water–cement ratio, cement content, water content and degree of hydration of hardened cement paste: Method development and validation on paste samples. Cement and Concrete Research, 39 (10), PP. 957-965.

21. Mehta P.K., Monteiro P., (1993). Concrete: Structure, Properties and Materials, 2nd ed., Prentice-Hall, New Jersey.

22. Shi, C. (1996). Strength, pore structure and permeability of alkali-activated slag mortars. Cement and Concrete. Research. 26(10), PP. 1789–1799