iipp publishingJournal of Applied Engineering Science

PRODUCTION OF TECHNOLOGY METALS FROM WASTE ELECTRONICS


DOI 10.5937/jaes17-22105
This is an open access article distributed under the CC BY-NC-ND 4.0 terms and conditions. 
Creative Commons License

Volume 17 article 621 pages: 399 - 402

Maja Mandic*
Faculty of Technology and Metallurgy, University of Belgrade
Jovana Dokic
Innovation Center of Faculty of Chemistry in Belgrade Ltd., University of Belgrade
Natasa Gajic
Innovation Center of Faculty of Technology and Metallurgy in Belgrade Ltd., University of Belgrade 
Jelena Uljarevic
Innovation Center of Faculty of Technology and Metallurgy in Belgrade Ltd., University of Belgrade 
Zeljko Kamberovic
Faculty of Technology and Metallurgy, University of Belgrade

The rising criticality of technologically inevitably metals and the continuous growth of the waste electronics promote a scientific need for development of innovative recycling process, both efficient and selective. Experimental results showed primarily that by pyrometallurgical treatment it is difficult to achieve selectivity, and secondary that the distribution of metals in melting products is too complicated, deviating from the experiential and expected. Therefore, application of an integral pyro - hydrometallurgical treatment is suggested for improved raw materials efficiency. Successful implementation of the developed state-of-art technological process, guarantee more efficient approach to recycling processes, production of new materials which supports the concepts of sustainable development and cleaner production. Proposed technological solution is applicable in industry with relatively low investments compared to expected revenues, allowing companies to become competitive in the regional market and beyond, which is particularly important for small and medium enterprises with lower operating capacities. Techno-economic justification and integral pyro - hydrometallurgical process for waste electronics recycling is presented. This paper explains measures for the further development of the recycling industry as a part of circular economy strategy in Serbia.

View article
  1. Zhang, L., Xu, Z. (2016). A review of current progress of recycling technologies for metals from waste electrical and electronic equipment. Journal of Cleaner Production, vol. 127, 19-36, DOI:10.1016/j.jclepro.2016.04.004
  2. Ilankoon, I.M.S.K., Ghorbani, Y., Chong, M.N., Herath, G., Moyo, T., Petersen, J., (2018), E-waste in the international context – A review of trade flows, regulations, hazards, waste management strategies and technologies for value recovery, Waste Management, 82, 258-275.
  3. European Commission, (2014). Report on Critical Raw Materials for the EU.
  4. J. Cui, J., Zhang, L. (2008). Metallurgical recovery of metals from electronic waste: A review, Journal of Hazardous Materials, vol. 158, 228-256, DOI: 10.1016/j.jhazmat.2008.02.001
  5. Worrell, E., Reuter, M. A., (2014). Handbook of recycling: State-of-the-art for practitioner, analysts, and scientists, USA: Elsevier, ISBN: 978-0-12-396459-5
  6. Nowakowski, P., Mrówczyńska, B., (2018). Toward sustainable WEEE collection and transportation methods in circular economy – Comparative study for rural and urban settlements, Resources, Conservation & Recycling, vol 135, 93-107, DOI: 10.1016/j.resconrec.2017.12.016
  7. European Commission, (2017). Best Available Techniques (BAT) Reference Document for Waste Treatment, Brussels.
  8. KITCO, from https://www.kitco.com/strategic-metals/, accessed on March 6. 2019.
  9. GoldPrice, from https://www.goldprice.org, accessed on March 6. 2019.
  10. LME, from https://www.lme.com/Metals/Non-ferrous#tabIndex=0, accessed on March 6. 2019.