DOI: 10.5937/jaes12-5669
This is an open access article distributed under the CC BY-NC-ND 4.0 terms and conditions.
Volume 12 article 274 pages: 45-50
In order to reduce the CO2 emission engineers and architects must optimize the use of materials,
particularly steel, making an optimal use of it. It is possible to guarantee
the strength of the structural element reducing the amount of steel locating
it properly at the cross-section and introducing a higher control level at
construction site.
E.
Hernandez-Montes, L.M. Gil-Martin, M. Pasadas-Fernandez, M. Aschheim, “Theorem
of Optimal Reinforcement for Reinforced Concrete Cross Sections”. Structural and
Multidisciplinary Optimization”, Vol. 36, 2008, p. 509-521.
Eurocode 3.
European Committee for Standarization. prEN1993-1-1. Eurocode 3. Design of
steel structures. Part 1.1: General rules and rules for buildings. Brussels;
2005.
Eurocode 4.
European Committee for Stan- darization. prEN1993-1-1. Eurocode 4. Design of
composite steel and concrete structures - Part 1-1: General rules and rules
for buildings. Brussels; 2004.
J.F.
Carbonell-Marquez, L: M. Gil-Martin, E. Hernandez-Montes, “Strength design
optimization of structural steel members according to Eurocode3 “. Journal of
Constructional Steel Research, Vol. 80, 2013, p. 213- 223.
L.M. Gil-Martin, E.
Hernandez-Montes, M. Aschheim, “Optimal reinforcement of RC columns for biaxial
bending“. Materials and Structures/Materiaux Et Constructions, Vol. 43(9),
p.1245-1256.
L.M. Gil-Martin, E.
Hernandez-Montes, M. Aschheim, “Optimization of piers for retaining walls”.
Structural and Multidisciplinary Optimization. Vol. 41 (6), June 2010, p.
979-987.
L.M. Gil-Martin, E.
Hernandez-Montes, M. Shin, M. Aschheim, “Developments in excavation bracing
systems”. Tunnelling and Underground Space Technology, Vol. 31, 2012, p.
107-116.
L.M. Gil-Martin, M.
Aschheim, E. Hernandez- Montes, “Proportioning of Steel Beam-Column Members
Based on RSD Optimization Methodology“. Engineering Structures. Vol. 30, 2008,
p. 3003-3013.
L.M. Gil-Martin, M. Aschheim, E. Hernandez- Montes, ’’Proportioning of
steel beam-column members based on RSD optimization methodology”. Engineering
Structures, Vol. 30(11), 2008, p. 3003-3013.