Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science


DOI: 10.5937/jaes0-27580 
This is an open access article distributed under the CC BY 4.0
Creative Commons License

Volume 19 article 781 pages: 192 - 203

Kamolchanok Kueaket
Prince of Songkla University, Faculty of Engineering, Department of Mining and Materials Engineering, Hat Yai, Thailand

Danupon Tonnayopas*
Prince of Songkla University, Faculty of Engineering, Department of Mining and Materials Engineering, Hat Yai, Thailand

The utilization of local waste by-products as a building material has attracted great attention for an environmental sustainability and become a fundamental part of sustainable construction. In this experimental research, the local palm oil industrial waste and agricultural waste are utilized for the green mortar production. To examine the compressive strength and the durability performance of the green mortar mixtures, Palm oil boiler clinker (POBC) was used as a substitution material for natural fine aggregate. An ordinary Portland cement was partially replaced by rice husk ash (RHA) and calcium bentonite (CB) in the proportion of 10%, 20%, and 30% by weight of cement. The compressive strength, water absorption, porosity, durability against sulphuric acid and sodium sulphate attacks, and microstructures of the POBC mortar mixtures were evaluated at the curing age of 7, 28, and 56 days. The experimental results revealed that the compressive strength, water absorption, porosity, and durability characteristics of POBC mortar incorporating RHA and CB were improved by long-term curing. Particularly, the 56-day POBC mortar incorporating up to 30% of RHA and 10% of CB yielded the superior durability against sulphuric acid and sodium sulphate attacks.

View article

The authors gratefully acknowledge to the Center of Excellence in Materials Engineering (CEME) and Faculty of Engineering, Prince of Songkla University for the financial support and Graduate Engineering scholarship. Furthermore, the first author sincerely expressed the special thanks to the PSU graduate school for PSU.GS. financial support for thesis. Besides, the authors immensely thank to Mr. Sombat Na Bumroong for his help in collecting the POBC samples.

1. Martínez-Lage, I., Vázquez-Burgo, P., Velay- Lizancos, M. (2020). Sustainability evaluation of concretes with mixed recycled aggregate based on holistic approach: Technical, economic and environmental analysis. Waste Management, vol. 104, 9-19, DOI: 10.1016/j.wasman.2019.12.044.

2. Liu, K.W., Sun, D.S., Wang, A.G., Zhang, G.Z., Tang, J.H. (2018). Long-term performance of blended cement paste containing fly ash against sodium sulfate attack. Journal of Materials in Civil Engineering, vol. 30, no. 12, 10, DOI: 10.1061/(asce)mt.1943- 5533.0002516.

3. Kumar, V.R.P., Gunasekaran, K., Shyamala, T. (2019). Characterization study on coconut shell concrete with partial replacement of cement by GGBS. Journal of Building Engineering, vol. 26, 9, DOI: 10.1016/j.jobe.2019.100830.

4. Chopra, D., Siddique, R., Kunal. (2015). Strength, permeability and microstructure of self-compacting concrete containing rice husk ash. Biosystems Engineering, vol. 130, 72-80, DOI: 10.1016/j.biosystemseng. 2014.12.005.

5. Lim, N., Mohammadhosseini, H., Tahir, M.M., Samadi, M., Sam, A.R.M. (2018). Microstructure and strength properties of mortar containing waste ceramic nanoparticles. Arabian Journal for Science and Engineering, vol. 43, no. 10, 5305-5313, DOI: 10.1007/s13369-018-3154-x.

6. He, Z., Chang, J., Liu, C., Du, S., Huang, M.A.N., Chen, D. (2018). Compressive strengths of concrete containing rice husk ash without processing. Revista Romana de Materiale/ Romanian Journal of Materials, vol. 48, no. 4, 499-506

7. Kueaket, K., Tonnayopas, D. (2018). Enhanced properties of palm oil boiler clinker concrete with Sang Yod rice husk ash. Journal of Advanced Research in Applied Mechanics, vol. 51, no. 1, 10-19

8. Economics. (2019). Palm oil agricultural statistics of thailand. Ministry of Agriculture and Cooperatives Thailand

9. Nutongkaew, P., Waewsak, J., Riansut, W., Kongruang, C., Gagnon, Y. (2019). The potential of palm oil production as a pathway to energy security in Thailand. Sustainable Energy Technologies and Assessments, vol. 35, 189-203, DOI: 10.1016/j. seta.2019.07.002.

10. Saswattecha, K., Kroeze, C., Jawjit, W., Hein, L. (2016). Options to reduce environmental impacts of palm oil production in Thailand. Journal of Cleaner Production, vol. 137, 370-393, DOI: 10.1016/j.jclepro. 2016.07.002.

11. Karim, M.R., Hashim, H., Abdul Razak, H., Yusoff, S. (2017). Characterization of palm oil clinker powder for utilization in cement-based applications. Construction and Building Materials, vol. 135, 21-29, DOI: 10.1016/j.conbuildmat.2016.12.158.

12. Saswattecha, K., Kroeze, C., Jawjit, W., Hein, L. (2015). Assessing the environmental impact of palm oil produced in Thailand. Journal of Cleaner Production, vol. 100, 150-169, DOI: 10.1016/j.jclepro. 2015.03.037.

13. Kanadasan, J., Fauzi, A.F.A., Razak, H.A., Selliah, P., Subramaniam, V., Yusoff, S. (2015). Feasibility studies of palm oil mill waste aggregates for the construction industry. Materials, vol. 8, no. 9, 6508- 6530, DOI: 10.3390/ma8095319.

14. Kanadasan, J., Razak, H.A., Subramaniam, V. (2018). Properties of high flowable mortar containing high volume palm oil clinker (POC) fine for eco-friendly construction. Journal of Cleaner Production, vol. 170, 1244-1259, DOI: 10.1016/j.jclepro. 2017.09.068.

15. Sandhu, R.K., Siddique, R. (2017). Influence of rice husk ash (RHA) on the properties of self-compacting concrete: A review. Construction and Building Materials, vol. 153, 751-764, DOI: conbuildmat.2017.07.165.

16. Prameetthaa, J., Bharatkumar, B.H., Iyer, N.R. (2015). Investigation on micronized biomass silica as a sustainable material. Cement & Concrete Composites, vol. 60, 25-33, DOI: 10.1016/j.cemconcomp. 2015.04.004.

17. Kang, S.-H., Hong, S.-G., Moon, J. (2019). The use of rice husk ash as reactive filler in ultra-high performance concrete. Cement and Concrete Research, vol. 115, 389-400, DOI: 10.1016/j.cemconres. 2018.09.004.

18. Gill, A.S., Siddique, R. (2018). Durability properties of self-compacting concrete incorporating metakaolin and rice husk ash. Construction and Building Materials, vol. 176, 323-332, DOI: 10.1016/j.conbuildmat. 2018.05.054.

19. Koushkbaghi, M., Kazemi, M.J., Mosavi, H., Mohseni, E. (2019). Acid resistance and durability properties of steel fiber-reinforced concrete incorporating rice husk ash and recycled aggregate. Construction and Building Materials, vol. 202, 266-275, DOI: 10.1016/j.conbuildmat.2018.12.224.

20. Monteny, J., Vincke, E., Beeldens, A., De Belie, N., Taerwe, L., Van Gemert, D., Verstraete, W. (2000). Chemical, microbiological, and in situ test methods for biogenic sulfuric acid corrosion of concrete. Cement and Concrete Research, vol. 30, no. 4, 623- 634, DOI: 10.1016/S0008-8846(00)00219-2.

21. Yuan, H., Dangla, P., Chatellier, P., Chaussadent, T. (2013). Degradation modelling of concrete submitted to sulfuric acid attack. Cement and Concrete Research, vol. 53, 267-277, DOI: 10.1016/j.cemconres. 2013.08.002.

22. Memon, S.A., Arsalan, R., Khan, S., Lo, T.Y. (2012). Utilization of Pakistani bentonite as partial replacement of cement in concrete. Construction and Building Materials, vol. 30, 237-242, DOI: 10.1016/j.conbuildmat. 2011.11.021.

23. Laidani, Z.E., Benabed, B., Abousnina, R., Gueddouda, M.K., Kadri, E. (2020). Experimental investigation on effects of calcined bentonite on fresh, strength and durability properties of sustainable self-compacting concrete. Construction and Building Materials, vol. 230, 11, DOI: 10.1016/j.conbuildmat. 2019.117062.

24. Mirza, J., Riaz, M., Naseer, A., Rehman, F., Khan, A.N., Ali, Q. (2009). Pakistani bentonite in mortars and concrete as low cost construction material. Applied Clay Science, vol. 45, no. 4, 220-226, DOI: 10.1016/j.clay.2009.06.011.

25. Hu, Y., Diao, L., Lai, Z.Y., He, Y.J., Yan, T., He, X., Wu, J., Lu, Z.Y., Lv, S.Z. (2019). Effects of bentonite on pore structure and permeability of cement mortar. Construction and Building Materials, vol. 224, 276- 283, DOI: 10.1016/j.conbuildmat.2019.07.073.

26. Man, X.Y., Haque, M.A., Chen, B. (2019). Engineering properties and microstructure analysis of magnesium phosphate cement mortar containing bentonite clay. Construction and Building Materials, vol. 227, DOI: 10.1016/j.conbuildmat.2019.08.037.

27. ASTM C150 / C150M-19a, Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, 2019.

28. ASTM C618-19, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, 2019.

29. ASTM C109 / C109M-16a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA, 2016.

30. ASTM C1437-15, Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA, 2015.

31. ASTM C373-14a, Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles, ASTM International, West Conshohocken, PA, 2014.

32. Alex, J., Dhanalakshmi, J., Ambedkar, B. (2016). Experimental investigation on rice husk ash as cement replacement on concrete production. Construction and Building Materials, vol. 127, 353-362, DOI: 10.1016/j.conbuildmat.2016.09.150.

33. Muthukrishnan, S., Gupta, S., Kua, H.W. (2019). Application of rice husk biochar and thermally treated low silica rice husk ash to improve physical properties of cement mortar. Theoretical and Applied Fracture Mechanics, vol. 104, 12, DOI: 10.1016/j. tafmec.2019.102376.

34. Mesboua, N., Benyounes, K., Benmounah, A. (2018). Study of the impact of bentonite on the physico-mechanical and flow properties of cement grout. Cogent Engineering, vol. 5, no. 1, DOI: 10.1080/23311916.2018.1446252.

35. Rong, Z.D., Ding, J.Y., Cui, Z.J., Sun, W. (2019). Mechanical properties and microstructure of ultra-high performance cement-based composite incorporating RHA. Advances in Cement Research, vol. 31, no. 10, 472-480, DOI: 10.1680/jadcr.17.00209.

36. Gopalakrishnan, R., Jeyalakshmi, R. (2020). The effects on durability and mechanical properties of multiple nano and micro additive OPC mortar exposed to combined chloride and sulfate attack. Materials Science in Semiconductor Processing, vol. 106, DOI:

37. Izzat, A.M., Al Bakri, A.M.M., Kamarudin, H., Sandu, A.V., Ruzaidi, G.C.M., Faheem, M.T.M., Moga, L.M. (2013). Sulfuric acid attack on ordinary portland cement and geopolymer material. Revista De Chimie, vol. 64, no. 9, 1011-1014

38. T Nijland, T.G., Larbi, J.A. (2010). Microscopic examination of deteriorated concrete. Maierhofer, C., Reinhardt, H.-W., Dobmann, G. (Eds.), Non-Destructive Evaluation of Reinforced Concrete Structures, Woodhead Publishing, vol. 1, 137-179.

39. Feng, P., Garboczi, E.J., Miao, C.W., Bullard, J.W. (2015). Microstructural origins of cement paste degradation by external sulfate attack. Construction and Building Materials, vol. 96, 391-403, DOI: 10.1016/j. conbuildmat.2015.07.186.

40. Panesar, D.K. (2019). Supplementary cementing materials. Mindess, S. (Eds.), Developments in the Formulation and Reinforcement of Concrete (Second Edition), Woodhead Publishing, 55-85.

41. Boudache, S., Roziere, E., Loukili, A., Colina, H. (2018). Influence of thermal preconditioning on the mechanism of external sulphate attack. Menendez, E., Baroghel-Bouny, V.e.r. (Eds.), External Sulphate Attack - Field Aspects and Lab Tests, vol. 21, Springer, Spain