Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science

Open Access Journal of Applied Engineering Science

Journal key title „Istrazivanja i projektovanja za privredu“, which was initially registered with the ISSN base, in 2011 has been supported by alternative (parallel) title „Journal of Applied Engineering Science” due to the Editorial board decision to completely go into English language. Data on the ISSN registration of printed and online editions of the journal are available at the previous links.

Aims and Scope: The Journal of Applied Engineering Science - JAES is an international journal dedicated to the improvement and dissemination of knowledge on methods, policies and technologies in technical sciences, energy, energy efficiency and environment, industrial engineering, traffic and transportation, quality management and other related sciences. JAES follows new trends and progress proven practice in listed fields, thus creating a unique forum (platform) for interdisciplinary or multidisciplinary dialog.

Periodicity: Yearly volumes, quarterly issues – papers published as soon as accepted, starting with 2003.

Review process: Double blind external peer review (reviewers and authors do not see the reviewer/author names)

Plagiarism checking: All submitted papers are checked against plagiarism with iThenticate tools: CrossCheck/iThenticate through SCIndeks Asistent.

CrossRef/DOI: Centre for Evaluation in Education and Science

Citations legitimacy: CiteMatcher through SCIndeks Asistent

Thesaurus-based keywords: AKwA/KwASS through SCIndeks Asistent 

Method of Publishing: Printed & Online, OPEN ACCESS under  CC-BY 4.0  terms and conditions.

All contents are freely available without charge to the user or his/her institution. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles published in JAES journal without asking prior permission from the publisher or the author.

ISSN: 1451-4117 (printed)     E-ISSN: 1821-3197 (online)     

Publisher:  Institut za istrazivanja i projektovanja u privredi, Beograd, Srbija
                     Institute for research and design in industry, Belgrade, Serbia

Co-publishers:
University of Belgrade, Faculty of Mechanical Engineering, Serbia
University of Belgrade, Faculty of Transport and Traffic Engineering, Serbia

Support: 
Serbian Ministry of Education, Science and Technological Development ranked the Journal of Applied Engineering Science as a  Journal of international importance (M24). Same Ministry financially supports journal’s publication.

When I need to do a lot of tasks I use additional resources. For example, I ask to write my dissertation for me guys from this platform. They are professionals and can write my dissertation for me on any theme.

Volume 20 Number 3

ISSN: 1451-4117
E-ISSN: 1821-3197

Aizhan Taskarina, Yermaganbet Abdrakhmanov, Maral Tussupbekova, Renat Tyulyubayev, Irina Deigraf, Iskakova Dinara, Kassenova Zhanar, Khaimuldinova Altyngul - 10.5937/jaes0-35071

SEMI-INDUSTRIAL TESTS OF A PROTOTYPE OF A NEW GRINDING EQUIPMENT – A LABYRINTH DISINTEGRATOR

Do Duc Trung, Nghien Nguyen Ba, Dung Hoang Tien - 10.5937/jaes0-35088

APPLICATION OF THE CURLI METHOD FOR MULTI-CRITICAL DECISION OF GRINDING PROCESS

Ahmad H. Alomari, Aslam A. Al-Omari, Wafa K. Aljizawi - 10.5937/jaes0-35118

EVALUATION OF TRAVEL TIME RELIABILITY IN URBAN AREAS USING MOBILE NAVIGATION APPLICATIONS IN JORDAN

Irfan Ardiansah, Nurpilihan Bafdal, Awang Bono, Edy Suryadi, Siti Nurhasanah - 10.5937/jaes0-35224

AN OVERVIEW OF IOT BASED INTELLIGENT IRRIGATION SYSTEMS FOR GREENHOUSE: RECENT TRENDS AND CHALLENGES

Liliya Kushchenko, Sergey Kushchenko, Alina Kambu, Alexander Novikov - 10.5937/jaes0-35593

THE ANALYZIING OF PERSONAL AND PUBLIC TRANSPORT TRAFFIC FLOWS IN BELGOROD AGGLOMERATION

Rano Khan Wassa, Muhammad Talha Khan, Ghulam Sarwar Chandio, Yaseen Haider, Umair Sarwar, Ali Akbar, Muhammad Umair - 10.5937/jaes0-35761

THE CURRENT STATUS OF LEAN MANUFACTURING IN SMALL, MEDIUM AND LARGE SCALE MANUFACTURING COMPANIES OF KARACHI, PAKISTAN

Rahman Ali Hussein, Mohammed Ali Nasser, Labed Kadhim Jawad, Mohanad Kadhim Mejbel - 10.5937/jaes0-35788

NUMERICAL STRENGTH OPTIMIZATION OF STRUCTURAL DESIGN MADE OF DATE PALM FRONDS LEAVES WOOD PARTICLEBOARD

Toty Buzauova, Bayanber Turehanov, Arman Mateshov, Algazy Zhauyt, Sarakul Ismagulova, Seitbek Zhunisbeko - 10.5937/jaes0-35874

PLANNING AND EXPERIMENTAL STUDIES OF SELECTION THE OPTIMAL WELDING MODE BY THE FRICTION OF FITTING RODS

Hamdeni Medriosa, Maidiawati, Jafril Tanjung , Zaidir - 10.5937/jaes0-35912

ANALYTICAL STUDY ON EFFECT OF CENTRAL OPENING OF MASONRY INFILL TO THE LATERAL STRENGTH OF RC FRAME STRUCTURE

Marwan, Muhammad Yanis, Zahratunnisa, Rinaldi Idroes, Nugraha G S, D B Dharma, Adi Susilo, Deni Saputra, Suriadi, Andri Yadi Paembonan - 10.5937/jaes0-36077

GEOTHERMAL RESERVOIR DEPTH OF SEULAWAH AGAM VOLCANO ESTIMATED FROM 1D MAGNETOTELLURIC

Siti Aisyah Nurjannah, Saloma, Arie Putra Usman, M. Lindung P. P. Wibowo - 10.5937/jaes0-36140

A NUMERICAL STUDY OF THE COMPARISON OF NORMAL CONCRETE AND LIGHT WEIGHT CONCRETE EXTERIOR BEAM-COLUMN JOINTS BEHAVIOR TO CYCLIC LATERAL LOADS

Sameera Abu-Attieh, Zakaria Al-Omaria, Walid Emar - 10.5937/jaes0-36314

MANAGEMENT AND DEVELOPMENT OF A RESIDENTIAL ENERGY STORAGE SYSTEM: A CASE STUDY JORDAN

Leonid Bukhtoyarov, Ol'ga Kunickaya, Alina Urazova, Pavel Perfiliev, Varvara Druzyanova, Sergey Egipko, Albert Burgonutdinov, Evgeniy Tikhonov - 10.5937/jaes0-36513

SUBSTANTIATING OPTIMUM PARAMETERS AND EFFICIENCY OF ROTARY BRUSH CUTTERS

Mikhail Doudkin, Alina Kim, Bekzat Aukenova, Radoslav Radenkov, Andrey Saveliev, Nikita Andryukhov - 10.5937/jaes0-37210

THEORETICAL INVESTIGATIONS OF THE PROCESS OF INTERACTION WITH THE ENVIRONMENT OF A BULLDOZER BLADOW WITH VARIABLE GEOMETRY

Etinosa Noma-Osaghae, Kennedy Okokpujie, Famoroti Daniel, Samuel N. John - 10.5937/jaes0-28642

THE VALIDITY OF A DECENTRALISED SIMULATIONBASED SYSTEM FOR THE RESOLUTION OF ROAD TRAFFIC CONGESTION

Andrey Linenko, Valerij Lukyanov, Aynur Aznagulov, Valinur Baynazarov, Timur Kamalov - 10.5937/jaes0-33133

ELECTROSTATIC TREATMENT OF AGRICULTURAL CROPS WITH AN UNMANNED ELECTRIC DEVICE

Omed Akber Abbass, Ayaz Aydin Abduljabbar - 10.5937/jaes0-33617

PERFORMANCE OF A HEAT PIPE SOLAR COLLECTOR WITH EVACUATEDPOLYCARBONATE FRONT COVER

Laxmikant G Keni, Padmaraj N H, Najiullah Khan, Jagadeesha P E, Pradeep R, Chethan K N* - 10.5937/jaes0-33912

ANALYSIS OF VIBRATION SIGNATURE IN DEEP GROOVE BALL BEARING USING FINITE ELEMENT METHOD

Mahdi Goucem, Mahi Senouci, Omar Imine - 10.5937/jaes0-33986

COMPARISON BETWEEN TWO PERFORMANCE CALCULATION METHODS APPLIED FOR VAWT

Mahfud Mahfud, Zuhdi Ma'sum, Donny Satria Bhuana, Ali Altway, Yuyun Yuniati - 10.5937/jaes0-34006

A COMPARISON OF ESSENTIAL OIL EXTRACTION FROM THE LEAVES OF LEMONGRASS (CYMBOPOGON NARDUS L.) USING TWO MICROWAVE-ASSISTED METHODS

Jaka Windarta, Denis, Singgih Saptadi, Kurnianto Fernanda, Vino Rahmana Putra, Faizal Aryo Widiatmoko - 10.5937/jaes0-34086

ON-GRID AND HYBRID SOLAR POWER PLANTS COMPARABILITY IN SEMARANG CITY, INDONESIA

Karthik B M, Sathyashankara Sharma, Gowrishankar M.C, Ananda Hegde, Doddapaneni Srinivas - 10.5937/jaes0-34780

EFFECT OF WEIGHT OF REINFORCEMENT AND COATING THICKNESS ON THE HARDNESS OF STIR CAST AL7075-NICKEL COATED DURALUMIN POWDER MMC

Konstantin Rukomojnikov, Evgenii Tsarev, Tatiana Sergeeva, Tatiana Gilyazova, Yurij Shirnin - 10.5937/jaes0-35136

MODELING THE FUEL CONSUMPTION OF FORWARDERS BASED ON DIFFERENT LOG SIZES AND FORWARDING DISTANCES

Faisal Rahman, Sugiono Sugiono, Achmad As’ad Sonief, Oyong Novareza - 10.5937/jaes0-35189

OPTIMIZATION MAINTENANCE PERFORMANCE LEVEL THROUGH COLLABORATION OF OVERALL EQUIPMENT EFFECTIVENESS AND MACHINE RELIABILITY

Aries Sulisetyono, Zambilly A. Washoya, Achmad Zubaydi - 10.5937/jaes0-35839

COMPUTATIONAL IMPACT PRESSURE OF THE FLOATPLANE’S BOTTOM IN VARIOUS OF DEADRISE AND FLARE ANGLES

Rano Khan Wassan, Shakeel Ahmed Shaikh, Imran Khan Shaikh, Muhammad Saad Memon, Abdul Rahman, Syed Feroz Hussain Shah - 10.5937/jaes0-36162

INITIAL SCREENING OF CRITICAL SUCCESS FACTORS FOR GREEN, LEAN AND SIX SIGMA IMPLEMENTATION IN PAKISTANI SMALL AND MEDIUM ENTERPRISES

Hanif Furqon Hidayat, Rachman Setiawan, Radon Dhelika*, Adi Surjosatyo, Hafif Dafiqurrohman - 10.5937/jaes0-34344

INVESTIGATION OF RELATIVE INFLUENCE OF PROCESS VARIABLES IN A 10-KW DOWNDRAFT FIXED-BED GASIFIER WITH ANN MODELS

Anmar H Salih, Hussain Dhafir Hussain - 10.5937/jaes0-35813

EVALUATION OF THE PHYSICAL AND RHEOLOGY PROPERTIES OF RUBBERIZED ASPHALT CEMENT