Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science


ISSN: 1451-4117

E-ISSN: 1821-31977
Volume 2 number 6, pages: 49 - 56

Zoran Golubovic 
University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia

Caslav Mitrovic 
University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia

Miroslav Stanojevic 
University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia

One of the most important steps in definitions of technology and constructive conception manufacturing systems is choosing types of filter and filter systems in which quality of using fluid is significant. Filtering systems are basic parts of technology process, otherwise them role is in human protecting, environmental, products and manufacturing process. The right chooses of filter and filter systems, adequate number of filtering steps, effective filtration on itch step effect on decrease cost of manufacturing, optimism technology process as like as attain a prime performance of filtering systems. Errors in filtering systems which issue like effect of contamination or inadequacy filtration can give manufacturing reduction, more maintenance expenses and other expenses of parts replacement before expire date. Because of that there is necessary to make optimization of technology process and make the right chaise of filtering equipment. This aspect is especially important in cases where we talking about water filtering. Water have specially role in maintenance of filtering systems. Thermo mechanical characteristics of water depended of technology process in which that filtering system is used. Characteristics of filtering systems can be deferent depended do we use them in pharmaceutics industry or refinery. There is a collective point of quality and quantity of water which is used for maintenance of filtering systems. In this paper can find analysis of typical examples of define filtering systems, lateness grade, recommended of water quality, steam, chemical regencies or same other fluid which is used. Also there are examples of choosing of filtering equipment from aspect of complicated clutch, filter requirement, side equipment, human qualifications and human resorts. After analysis there are find adequate conclusions.

View article

1. Filttration Science and Technology - a Guide to the Fundamentals, Gelman Sciences, Publikacija firme Gelman, 1989.

2. Principles of Filtration, a Pall Scientific and Technical Report, Publikacija firme Pall, 1997.

3. Contamination, Control and Filtration Fundamentals, Pall Industrial Hydraulics, Publikacija firme Pall, 1997.

4. Filter Cartridge Technology for the Biohparmaceutical Industry, Publikacija firme Sartorius, 1999.

5. Membrane Separation Products, Publikacija firme Filtron, 1999.

6. Mitrović, V., M.: Reverzna osmoza, Zbornik radova – Izbor savremene opreme za objekte vodovoda, kanalizacije i zaštite životne sredine, Beograd, 2003.

7. Stanojević, M., Lazarević, B., Radić, D.: Review of membrane contactors designs and applications of different modules in industry, FME Transactions, University of Belgrade Faculty of Mechanical Engineering, New Series, Volume 31, Number 2, 2003, p. 91-98.

8. Golubović, Z., Mitrović, M.: Membranska filtracija – Od teorije do prakse, u štampi, 2003.

9. Mitrović, Č., Golubović, Z.: On Filtration and Separation in Aerospace, u štampi,2003.