Issue

Volume 20 Number 2

ISSN: 1451-4117
E-ISSN: 1821-3197

Alica Kalašová, Ambróz Hájnik, Stanislav Kubaľák, Ján Beňuš, Veronika Harantová - 10.5937/jaes0-33043

THE IMPACT OF ACTUATED CONTROL ON THE ENVIRONMENT AND THE TRAFFIC FLOW

Qusay Al-Kaseasbeh, Ahmed Albarram - 10.5937/jaes0-32490

NUMERICAL EVALUATION OF SEISMIC PERFORMANCE OF CORRUGATED-PLATE SHAPED STEEL TUBES

Essam Z. Fadhel, Ameen M. Al Juboori, Mustafa Turki hussein - 10.5937/jaes0-33468

MODELLIING AND SIMULATION OF 5-DOF ROBOT ON SIMMECHANICS

Nursiah Chairunnisa, Ratni Nurwidayati, Gusti Muhammad Madani S - 10.5937/jaes0-32879

THE EFFECT OF NATURAL FIBER (BANANA FIBER) ON THE MECHANICAL PROPERTIES OF SELF-COMPACTING CONCRETE

Lukman Samboteng, Rulinawaty, M.Rachmat Kasmad, Mutmainnah Basit, Robbi Rahim - 10.5937/jaes0-32019

MARKET BASKET ANALYSIS OF ADMINISTRATIVE PATTERNS DATA OF CONSUMER PURCHASES USING DATA MINING TECHNOLOGY

Abdulrazzaq Abdzaid Hussein, Fawzi Sh. Alnasur, Ahmed Ch. Almansoori, Mushtaq A. AL-Furaiji - 10.5937/jaes0-32922

STUDY THE EFFECT OF OPERATIING OF THE NORTH AND SOUTH AL DIWANIYAH POWER PLANTS ON THE CITY OF AL DIWANIYAH

Vyacheslav Kraev, Alexey Tikhonov and Irina Kuzmina-Merlino - 10.5937/jaes0-31570

ECONOMIC AND ECOLOGICAL ASPECTS OF THE USE OF NEW CRYOGENIC AVIATION FUELS

Ananda Hegde, Jamaluddin Hindi, Gurumurthy BM, Sathyashankara Sharma, Achutha Ki - 10.5937/jaes0-32927

MACHINABILITY STUDY AND OPTIMIZATION OF TOOL LIFE AND SURFACE ROUGHNESS OF FERRITE – BAINITE DUAL PHASE STEEL

Samiullah, Mohammad Ashraf, Muhammad Fahim, Muhammad Haris, Sajjad Wali Khan, Wajid Khan - 10.5937/jaes0-33000

MECHANICAL PROPERTIES CHARACTERIZATION OF RAT-TRAP BOND BRICK MASONRY

Duc-Toan Tran, Van-Hung Pham, Duc-Do Le and Tuan-Anh Bui - 10.5937/jaes0-32506

A STUDY ON INFLUENCE OF ENVIRONMENTAL WORKING CONDITIONS ON WEAR OF A BALL SCREW BASED ON TCVN7699-2-30

Jenan Abu Qadourah, Ala’a M. Al-Falahatb, Saad S. Alrwashdehb - 10.5937/jaes0-32783

INVESTIGATE THE CARBON FOOTPRINTS OF THREE INTERMEDIATE FLOORING SYSTEMS: CROSS-LAMINATED TIMBER, SOLID CONCRETE, AND HOLLOW-CORE PRECAST CONCRETE

Danar Susilo Wijayanto, Soenarto, Mochammad Bruri Triyono, Husni Ibadi - 10.5937/jaes0-33297

DOUBLE-STAGE SAVONIUS AND DARRIEUS WIND TURBINES FOR URBAN AREAS USING FIBERGLASS MATERIALS

Aleksandr Galkin, V. Yu. Pankov - 10.5937/jaes0-34379

THERMAL PROTECTION OF ROADS IN THE PERMAFROST ZONE

Karibek Sherov, Saule Ainabekova, Issa Kuanov, Balgali Myrzakhmet, Yeldos Bekzhanov, Riza Gabdyssalik, Assylkhan Mazdubay, Aman Kamarov, Aibek Sherov - 10.5937/jaes0-32723

RESEARCH OF TEMPERATURE DISTRIBUTION IN THE PROCESS OF THERMO-FRICTIONAL CUTTING OF TITANIUM ALLOY TI-5553

Abu Bakarr Momodu Bangura, Ridho Hantoro, Ahmad Fudholi, Pierre Damien Uwitije - 10.5937/jaes0-33614

PARAMETRIC STUDY OF A SOLAR DRYER SYSTEM FOR THE DEVELOPMENT AND APPLICATION OF SOLAR ENERGY IN SIERRA LEONE

Gavrilin Alexey Nikolaevich, Odnokopylov Georgy Ivanovich, Bukreev Viktor Grigorievich, Nikonova Tatyana Yuryevna, Zharkevich Olga Mikhailovna, Buzauva Toty Meirbekovna - 10.5937/jaes0-33132

METHODOLOGY OF ENSURING THE EFFICIENCY OF MECHANICAL PROCESSING DUE TO THE APPLICATION OF VIBRATION MONITORING AND VIBRATION PROTECTION MEANS

Farah M. Hussein, Saif Altai, Asmaa G. Sami - 10.5937/jaes0-34663

WORKABILITY ADJUSTMENT AND SENSITIVITY OF DIFFERENT FINE CEMENT MIXTURES TO POLYCARBOXYLATE ETHER-BASED SUPERPLASTICIZER

Layla A. Yassin, Alyaa H. Mohammed, Farah L. Rauf - 10.5937/jaes0-34451

THE INFLUENCE OF STEEL FIBRES AND RPC THICKNESS ON THE BEHAVIOUR OF HYBRID COLUMNS UNDER CONCENTRIC LOADING

Minh Pham Van, Dung Pham Quang - 10.5937/jaes0-33110

METHOD FOR DETERMINING WORKING REGIMES WITH REASONABLENESS OF EQUIPMENT CASING PIPES BY ROTARY PRESS – IN

Dulovičová Renáta, Ovcharovichova Janka, Velísková Yvetta - 10.5937/jaes0-34334

STATISTICAL METHOD FOR A HYDRAULIC CONDUCTIVITY ESTIMATE USING EMPIRICAL FORMULAS

Fayez Alanazi, Ping Yi, Nader El Gehawi - 10.5937/jaes0-34023

IMPROVING THE PERFORMANCE OF UNSIGNALIZED T-INTERSECTIONS WITHIN CAVS MIXED TRAFFIC

Ari Wibawa Budi Santosa, Muhammad Fathan Mausulunnaji, Nanang Setiyobudi, Deddy Chrismianto, Eko Sasmito Hadi - 10.5937/jaes0-31979

ENGINE PROPELLER MATCHING ANALYSIS ON FISHING VESSEL USING INBOARD ENGING

Syaiful Syaiful, Hendra Rusfana - 10.5937/jaes0-33565

RIGID PAVEMENT PLANNING IN TRAFFIC: CASE STUDY IN CIHERANG ROAD AND PEMUDA ROAD, BOGOR REGENCY, INDONESIA

Mervat Beramly, Mutasim Abdel-Jaber, Hasan Katkhuda, Nasim Shatarat, Malak Al-diseet - 10.5937/jaes0-34390

SHEAR STRENGTHENIING AND REHABILITATING OF REINFORCED CONCRETE T-BEAMS USING EXTERNALLY CARBON FIBER REINFORCED POLYMER SHEETS

Sofyan M. Saleh, Fadhlullah Apriandy, Sugiarto Sugiarto, Lulusi Lulusi, Alfi Salmannur - 10.5937/jaes0-34044

INVESTIGATING THE DETERMINANTS OF TRAVEL MODE CHOICE ACROSS AGE CLASSES IN LANGSA, INDONESIA UTILIZING LOGIT MODEL

Claudio Bernuzzi, Elisa Bertinotti, Massimo Frau, Marco Simoncelli - 10.5937/jaes0-34255

DERRICK CRANE ROBUSTNESS SCENARIOS

Mikhail Banket, Dmitry Shapoval, Ivan Eychler, Irina Pogulyaeva, Denis Aleshkov - 10.5937/jaes0-36647

COST ESTIMATE FOR FILLING WITH DIFFERENT MOTOR FUELS IN FREIGHTING BY LIGHT-DUTY VEHICLES

Ahmed S. D. AL-Ridha, Firas Saeed Abbas, Hamid Abdul Mahdi Faris, Layth Sahib Dheyab, Eng. Hameed Zaier Ali, Eng. Mohammed Sabah Mohialdeen - 10.5937/jaes0-33435

THE INFLUENCE OF CHOPPED COPPER FIBRE (CF) ON THE IMPROVEMENT OF PURE GYPSUM BY COMPRESSIVE STRENGTH

Rano Khan Wassan, Zahid Hussain Hulio, Miskeen Ali Gopang, Umair Sarwar, Ali Akbar, Shuaib Kaka - 10.5937/jaes0-34558

PRACTICAL APPLICATION OF SIX SIGMA METHODOLOGY TO REDUCE DEFECTS IN A PAKISTANI MANUFACTURING COMPANY

Milena Žunjić, Miroslav Demić, Branislav Rakićević, Branislav Đorđević - 10.5937/jaes0-32961

CONTRIBUTION TO THE INVESTIGATION OF THE INFLUENCE OF TIRE NON-UNIFORMITY ON THE LATERAL TIRE CHARACTERISTICS

Shahlla Abbas Abulqasim, Abdul Qader Nihad Noori, Tuncer Celik - 10.5937/jaes0-32985

NUMERICAL INVESTIGATION ON FLEXURAL BEHAVIOR OF RC BEAMS WITH LARGE WEB OPENING EXTERNALLY STRENGTHENED WITH CFRP LAMINATES UNDER CYCLIC LOAD: THREE-POINT BENDING TEST

Mohammad M. Hamasha, Abdulaziz Ahmed, Haneen Ali, Sa'd Hamasha, Faisal Aqlan - 10.5937/jaes0-35413

AN APPROXIMATION TO THE INVERSE OF LEFT-SIDED TRUNCATED GAUSSIAN CUMULATIVE NORMAL DENSITY FUNCTION USING POLYA’S MODEL TO GENERATE RANDOM VARIATES FOR SIMULATION APPLICATIONS

Padmaraj N H, Laxmikant G Keni, Chethan K N, Sharun Hegde, Nithin I R, Anush Kumar, Abhishek Mendon - 10.5937/jaes0-34487

Istrazivanja i projektovanja za privreduJournal of Applied Engineering Science